3.2 x 3.2mm SMD power inductor for point-of-load regulators and portable devices. Open drum construction, so keep it clear of small-signal traces — the shielded SMD drum core is the alternative where that matters.
Part outline
Construction
Ferrite Drum Core, Enamelled Copper Winding
Saturation
Inductance
DC current
Published figures describe the standard build. Every part is wound to order — send your exact requirement and we will confirm the specification on the quotation.
Power inductors for buck, boost and DC-DC converter stages, wound for low DC resistance and high saturation current.
Wound to your inductance, saturation current and DC resistance targets on a ferrite or iron powder core. Tell us the converter topology, switching frequency and ripple budget and we will size the core and the gap around them.
Inductance: To Specification
View specificationThrough-hole radial power inductor around 150 µH at 4.6 A with low DCR for DC-DC and output filtering.
DCR: ~69 mΩ class
View specificationThrough-hole radial power inductor around 220 µH at 330 mA for compact filtering and low-current converter stages.
DCR: ~1.1 Ω class
View specificationStart a project
Send your inductance, turns ratio, current rating and mechanical envelope — we will come back with a design and a price.
Direct lines
Pune, Maharashtra · Replies within 24 hours
